Basic Guide to Finding Hidden Valves and Piping
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.
If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.
If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.
In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.
If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.